Childrens bed canopy – let your child drifting in a dream world in his own size and child-poster bed. The best part is that you can make this possible by building one yourself inexpensively. You can encourage your child to choose curtains so that the bed is her face.
Instructions to build a childrens bed canopy: 1) Make sure that the ends of all the woods are straight so that all measurements are correct. 2) Cut the plywood so that it is with 96.5 cm wide and 190.5 cm in length, so that an American single mattress (twin) fits the child poster. Use leftovers to make two side pieces 20 cm x 99 cm. 3) Make a notch in the corners of the bed where you can place the poles, then notch 6.5 cm from the inner part of each post to accommodate the mattress. 4) Lay two of the poles horizontally on the ground so that they are 190.5 cm apart. 5) Decide what time you want that the mattress is on the floor and place the side piece on the posts at that time. Make sure that the side pieces and the posts are seated evenly. Now make pilot holes and fix the side piece in place using screws # 10 of 1 ½ inch (38.1 mm). Repeat childrens bed canopy with the other posts.